What to do if my PHILIPS Respironics SimplyGo Mini won't turn on?
If your PHILIPS Respironics device isn't turning on, there are several possible causes. First, the battery may be depleted; try using the AC or DC power cords to operate the device (with the battery inserted) to recharge it. If that doesn't work, the battery might not be installed correctly; remove it and re-install it. Finally, make sure you press the power button twice.
What to do if PHILIPS Respironics SimplyGo Mini Medical Equipment will not trigger a pulse of oxygen?
If your PHILIPS Respironics device isn't triggering a pulse of oxygen, there are a couple of things to check. First, make sure the device is turned on by pressing the power button twice. Also, ensure the cannula tubing is connected properly to the oxygen outlet port and that it is free of any obstruction.
Why is oxygen not at full concentration in PHILIPS Respironics SimplyGo Mini Medical Equipment?
If the oxygen is not at full concentration, it may be because the device is still warming up. Continue using your device, and wait 20 minutes for the device to deliver oxygen at the prescribed concentration.
General| Battery Type | Rechargeable Lithium Ion |
|---|---|
| Sound Level | 43 dBA at setting 2 |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Oxygen Delivery Modes | Pulse Dose, Continuous Flow |
| Pulse Dose Settings | 1 - 5 |
| Continuous Flow Settings | 0.5, 1, 2 LPM |
| Battery Life (Pulse Dose) | Up to 4.5 hours with standard battery |
| Battery Recharge Time | Approximately 4 hours |
| Operating Altitude | Up to 10, 000 feet (3048 meters) |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Humidity Range | 15% to 95% non-condensing |
| Weight | 5 lbs (2.3 kg) with standard battery |
| Warranty | 3 years |
Device for prescription use by patients requiring high concentrations of oxygen.
Lists reasons why the device should not be used.
Details the device features and included accessories.
Lists the items included in the SimplyGo Mini system package.
Potential hazards to the operator or patient.
Potential for damage to the equipment.
Explanation of symbols used in the manual.
Introduction to the device's main components and their functions.
Procedure for fully charging the device's battery using AC power.
How to power the device using AC, DC, or battery.
Instructions for connecting and verifying the alarm system.
Guidance on moving between screens and adjusting settings.
How to view the current battery charge level.
Explanation of visual and audio alarms and their meanings.
Common problems, their causes, and recommended solutions.
Guidelines for handling and maintaining the device's battery.
Instructions for cleaning the device exterior and battery.
Information on the device's portability and how to use its carrying case.
Advice and preparation for traveling with the device.
Technical details and performance parameters of the device.
Terms and conditions of the product warranty.
To Next Page
