Smart Management
11
SmartControl
It's a convenient alternative for adjusting monitor performances and
settings through a software interface.
SmartControl displays a properties control panel to adjust the
brightness, contrast, color temperature, position and other settings.
SmartControl also displays hardware information including the
model, serial number, run hours from the interface.
The SmartControl is deployed and installed in computers using
Philips monitors. So the monitors and PC can interact with the
Administrator's inquiries.
· All graphic cards with nVIDIA and ATI graphic chipsets
which support DDC/CI interface
· Microsoft Windows 2000 and XP operation systems.
· All Philips monitors supporting DDC/CI interface
2. Installation
How to download "SmartControl Installation " file:
Please follow the guidance in the SmartControl installation program.
3. Accessing SmartControl
· Right click on the desktop of your PC, and select
Properties from the shortcut menu pops up.
· Click on Settings tab, and click on Advanced button.
Click Philips SmartControl tab.
4. SmartControl Options
Display and Sound
By moving the sliding bar toward left or right, users will be able to
adjust brightness, contrast, volume (if applicable), video noise (not
applicable when using DVI-D input), and color temperatures.
· Position
Users can adjust the horizontal and vertical position of
the screen by moving the sliding bar left and right.
This function is disabled when using DVI-D (digit)
input.
· Product Information
Click Product Information in the left pane to view the
product information stored in the monitor's memory.
· General
Click on general, users will be able to know some
general information such as driver information, device
information and monitor control.
Within monitor control, users can click on Auto Setup to achieve
optimum performance or click on factory reset to reset the
parameters of the monitor. Such choices are disabled when
using DVI-D (digit) input.
To Next Page
Loading...
