Philips 170C6FS/00 - Trouble Shooting

37
Trouble Shooting
Vertical flicker appears
· Press the Auto button.
· Eliminate the verticalbars using the
More Settings ofPhase/Clock in OSD
Main Controls.
Horizontal flicker appears
· Press the Auto button.
· Eliminate the verticalbars using the
More Settings ofPhase/Clock in OSD
Main Controls.
The screen is too bright or too dark
· Adjustthecontrast and brightness on
OSDMain Controls. (The backlight of
the LCD monitor has a fixed life span.
When the screen become sdar k or
begins to flicker,please contact your
dealer).
An after-image appears
· If animage remains on the screen for
anextendedperiod of time, it may be
imprinted in the screen and leave an
after-image. This usuallydisappears
after afew hours
An after-image remainsafter the
power has been turned off.
· This ischaracteristic of liquidcrystal
and is not caused byamalfunction or
deterioration of the liquidcrystal. The
after-image will disappear after aperoid
of time.
Green, red, blue,dark, andwhite
dots remains
· The remaining dotsare normal
characteristic of the liquidcrystalused
in today’s technology