44
Firmware Upgrade for CPU
2. Press the Load hex then select the hex file as shown
in Fig. 8.
4 Select NT68F633 then press the AUTO to running program ,
the firmware be updated as shown in Fig. 9~10.
Fig. 8
If there is a warring message coming as shown in Fig 13. , you
havetochecktheACpower,Videocable,orNovatekMCU.
Fig. 11
Fig. 12
4 Pressthe file-->exit toend program ,asshown inFig.12.
Fig. 9
Fig.
2.09
Fig. 13
To Next Page
Loading...
