Philips 190CW8FB/00 - Page 19

19
DDC Instructions
HUDSON 8
Fig. 18
Fig. 19
4. Click Next , bring up Fig.18.
5. Click Next , bring up Fig.19.
6. Click Next , bring up Fig. 20.
Fig. 20
2. Click Next , bring up Fig.16.
Fig. 16
Fig. 17
3. Click Next , bring up Fig.17.
Fig. 15
In this step, please confirm the Descriptor Data Type is Monitor
Range Limits, and all the items are same as below.
NOTE: You must modify the Serial NO. In step 7, otherwise the
Serial NO. In OSD Couldn't be modified correctly.