220B2 22” Wide 16:10 LCD Monitor
2010/02/10 PHILIPS 7 of 29
60 220BL2 LCD
General Product Specification
Display surface : Haze 25% Hard coating (3H)
Color depth : 16.7M (6 bit Hi-FRC)
Backlight : 2 CCFL
Active area (W x H) : 473.76(H) x 296.1(V) mm
View angle (CR=10) : =160 for Right/Left (Typ)
: =160 for Up/Down (Typ)
Contrast ratio : 1000:1 (Typ)
White luminance : 250(Typ.)
Color gamut : >=72%
Response time : Tr + Tf <=5 ms (Typ)
Vertical frequency range : 50~75Hz
LGD
Type NR. : LGD LM220WE1-TLP1
Resolution : 1680 x 1050 (WSXGA+)
Outside dimensions : 493.7(H) x 320.1 (V) x 14.5(D) mm (Typ.)
Pitch (mm) : 0.282mm x 0.282mm
Color pixel arrangement : 1680 horizontal By 1050 vertical Pixels. RGB stripe arrangement
Display surface : Hard coating (3H), Anti-glare treatment of the front polarizer
Color depth : 16.7M colors
Backlight : 2 CCFL
Active area (W x H) : 21.995 inches(558.673mm) diagonal (Aspect ratio 16:10)
View angle (CR>=10) : R/L 170(Typ.), U/D 160(Typ.)
Contrast ratio : >1000:1 (Typ)
White luminance : 250 cd/m2(Typ. Center 1 point)
Color gamut : >=72%
Response time : <=5 ms (Typ)
Vertical frequency range : 50~75Hz
CMO
Type NR. : CMO M220Z1-L0A
Resolution : 1680 x 1050 (WSXGA+)
Outside dimensions : 493.7(H) x 320.1 (V) x 16.5(D) mm (Typ.)
Pitch (mm) : 0.282mm x 0.282mm
Color pixel arrangement : 1680 horizontal By 1050 vertical Pixels. RGB stripe arrangement
Display surface : Hard coating (3H), Anti-glare treatment of the front polarizer
Color depth : 16.7M colors
Backlight : 2 CCFL
Active area (W x H) : 21.995 inches(558.673mm) diagonal (Aspect ratio 16:10)
View angle (CR>=10) : R/L 170(Typ.), U/D 160(Typ.)
Contrast ratio : >1000:1 (Typ)
White luminance : 250 cd/m2(Typ. Center 1 point)
Color gamut : >=72%
Response time : <=5 ms (Typ)
Vertical frequency range : 50~76Hz