Philips 220BL2CB/00 - Scanning Frequencies

ʳ
ʳ
ʳʳʳʳʳ
ʳ
ʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ˃ˁ˄
220B2 22” Wide 16:10 LCD Monitor
2010/02/10 PHILIPS 8 of 29
220BL2 LCD 61
General Product Specification
LGD(WLED)
Type NR. : LGD LM220WE5-TLC1
Resolution : 1680 x 1050 (WSXGA+)
Outside dimensions : 493.7(H) x 320.1 (V) x 14.5(D) mm (Typ.)
Pitch (mm) : 0.282mm x 0.282mm
Color pixel arrangement : 1680 horizontal By 1050 vertical Pixels. RGB stripe arrangement
Display surface : Hard coating (3H), Anti-glare treatment of the front polarizer
Color depth : 16.7M colors
Backlight : WLED
Active area (W x H) : 21.995 inches(558.673mm) diagonal (Aspect ratio 16:10)
View angle (CR>=10) : R/L 170(Typ.), U/D 160(Typ.)
Contrast ratio : >1000:1 (Typ)
White luminance : 250 cd/m2(Typ. Center 1 point)
Color gamut : >=68%
Response time : <=5 ms (Typ)
Vertical frequency range : 50~75Hz
CMO
Type NR. : CMO M220Z3-LA1
Resolution : 1680 x 1050 (WSXGA+)
Outside dimensions : 493.7(H) x 320.1 (V) x 10(D) mm (Typ.)
Pitch (mm) : 0.282mm x 0.282mm
Color pixel arrangement : 1680 horizontal By 1050 vertical Pixels. RGB stripe arrangement
Display surface : Hard coating (3H), Anti-glare treatment of the front polarizer
Color depth : 16.7M colors
Backlight : WLED
Active area (W x H) : 21.995 inches(558.673mm) diagonal (Aspect ratio 16:10)
View angle (CR>=10) : R/L 170(Typ.), U/D 160(Typ.)
Contrast ratio : >1000:1 (Typ)
White luminance : 250 cd/m2(Typ. Center 1 point)
Color gamut : >=70%
Response time : <=5 ms (Typ)
Vertical frequency range : 50~75Hz
2.3 Scanning frequencies
Hor. : 30 – 83 K Hz
Ver. : 56 - 76 Hz
Video dot rate: < 170 MHz for VGA and < 170 MHz for DVI, warning message must be
displayed while over 165 MHz (supplier to provide accurate scaler bandwidth number)
Power input: 90-264 V AC, 50/60 r 2 Hz
Power consumption:
On mode: < 56W (max.) for 225P2, 225PL2
On mode: < 50W (max.) for 220B2, 225B2, 220BL2, 225BL2
EPA 5.0 spec. < 29.75 watt
EPA 5.0 measure data < 25 watt
SmartImage ECO mode: < 17.5wtt