Philips 220VW9FB/97 - 19. General Product Specification; General Product Specification

HUDSON 9
73
19. General Product Specification
CONTENTS
1 FOREWORD
2 PRODUCT PROFILE
2.1 LCD
2.2 SCANNING FREQUENCIES
2.3 AMBIENT TEMPERATURE: 0 °C - 40 °C
3 ELECTRICAL CHARACTERISTICS
3.1 INTERFACE SIGNALS
3.2 TIMING REQUIREMENT
3.3 VERTICAL SCANNING
3.4 POWER INPUT CONNECTION
3.5 POWER MANAGEMENT
3.6 VGA DISPLAY IDENTIFICATION
3.7 DDC/ CI SUPPORT
3.8 HOT-KEY DEFINITION
3.9 EDID
4 VISUAL CHARACTERISTICS
4.1 TEST CONDITIONS
4.2 BRIGHTNESS
4.3 IMAGE SIZE
4.4 BRIGHTNESS UNIFORMITY
4.5 CHECK CROSS TALK (S)
4.6 WHITE COLOR ADJUSTMENT
4.7 OUT OF BOX SETTINGS
5 MECHANICAL CHARACTERISTICS
5.1 COSMETIC PHILIPS ID
5.2 MECHANICAL DATA FILES PROE FILES REQUIRED
5.3 LOCATION OF PHILIPS LOGO PER PHILIPS MAKE-UP SHEET
5.4 GAP BETWEEN PANEL AND FRONT BEZEL 1.2MM
5.5 LOCATION OF CONTROL ICONS- PER PHILIPS GRAPHIC SHEET
5.6 COLOR FOR RESIN/PAINT PER PHILIPS MAKE-UP SHEET
5.7 RESINS
5.8 IF RAINT IS USED
5.9 PLASITIC MOLD TOOLING
5.10 PLASTICS FLAMMABILITY
5.11 TEXTURE/GLOSSING OF HOUSING
5.12 TILT AND SWIVEL BASE
5.13 KENNSINGTON LOCK
5.14 LABEL
5.15 PRODUCT DIMENSION/ WEIGHT (REFER TO SHT 191)
5.16 TRANSPORTATION
5.17 PALLET/CONTAINER LOADING
6. ENVIRONMENTAL CHARACTERISTICS
http://www.wjel.net