HUDSON 9
75
1. FOREWORD
This specification describes a 21.6" SXGA multi-scan color TFT LCD monitor with maximum resolution up to 1680 x
1050 /60 non-interlaced. All optical characteristics (including WHITE-D, Brightness, and so on) are determined
according to panel specification after warming up approximate 30 minutes that brightness stability is optimal, and
follow strictly after panel specification.
2. PRODUCT PROFILE
This display monitor unit is a color display monitor enclosed in PHILIPS styling cabinet which has an integrated tilt
base.
2.1 LCD
Priority : 1. CPT
Type : TFT-LCD
Supplier offer the Panel specification.
Panel incoming specification : Follow Philips’ specification.
LPL LM201W01-SLA1
Resolution : 1680x1050 (WSXGA+)
Outside dimensions : 493.7(H) x 320.1(V) x 16.5D)
Pitch ( mm ) : 0.27675mm x 0.27675mm
Color pixel arrangement : RGB strip arrangement
Display surface : Hard coating(3H) & Anti-Glare treatment of the front polarizer
Color depth : 16.7M colors
Backlight : 4 CCFL edge light system
Active area (WxH) : 464.94 x 290.5875mm
View angle (CR>10) : 170/160 (typ) for Horizontal & Vertical
Contrast ratio : 1000:1(typ)
White luminance : 300 nit(typ)
Color gamut :72%(typ)
Gate IC :
Source IC :
Response time : 5 ms(typ)
2.2 Scanning frequencies
Hor. : 30 – 83 K Hz
Ver.: 56 - 76 Hz
Video dot rate: < 165 MHz
Power input: 90-264 V AC, 50/60 ± 2 Hz
Power consumption : <60W maximum, <50W ( typ.)
Functions:
D-SUB analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level, SOG sync
2.3 Ambient temperature: 0 °C - 40°C
3. Electrical characteristics
http://www.wjel.net
To Next Page
Loading...
