11
English
EN
• [Picture format]: Changes the picture
format.
• [Picture size]: Adjusts the viewing area.
(When set to maximum, you might see
noise or a rough edge of an image.)
• [Horizontal shift]: Adjusts the picture
horizontally for PC-VGA or HDMI input.
• [Vertical shift]: Adjusts the picture
vertically for PC-VGA or HDMI input.
Manually adjust picture settings
1 Press MENU > [PBS Settings] >
[Consumer Setup] > [Yes].
» The consumer menu appears.
2 Select [Picture] and press OK.
3 Press to select the following
settings.
• [Smart picture]: Accesses pre-dened
smart picture settings.
• [Video contrast]: Adjusts the intensity
of video contents, keeping backlight
unchanged.
• [Contrast]: Adjusts the intensity of
backlight areas, keeping video contents
unchanged.
• [Brightness]: Adjusts the intensity and
details of dark areas.
• [Color]: Adjusts color saturation.
• [Hue]: Compensates for color variations.
• [Sharpness]: Adjusts sharpness in the
image.
• [Noise reduction]: Filters and reduces
noise in an image.
• [Color Temperature]: Sets the color
temperature to cool, normal, or warm.
• [Digital Crystal Clear]: Fine-tunes each
pixel to match surrounding pixels. This
produces a brilliant, high-denition image.
• [Dynamic contrast]: Enhances
contrast. A [Medium] setting is
recommended.
• [Dynamic backlight]: Adjusts
brightness of the TV backlight to
match lighting conditions.
• [Color enhancement]: Makes colors
more vivid and improves the details
in bright colors. You can switch this
feature on or off.
• [PC mode]: Adjusts the picture when a
PC is connected to the TV via HDMI or
DVI.
To Next Page
Loading...
