Philips 32HFL5332 - Speaker Settings

29
English
EN
[HDMI-CEC in]
HDMI-CEC (Philips EasyLink) enables one-
touch play, one touch standby, and one-touch
audio between HDMI-CEC compliant devices.
Note
• Before activating HDMI-CEC in function, make
sure the HDMI-CEC compliant devices are
turned to on.
• Selects [EasyLink] > [On] rst before enabling
[HDMI-CEC in] in Professional mode.
• Refer to page 37 “Use Philips EasyLink” for
more details about HDMI-CEC function.
• [Off]: Disables HDMI-CEC feature in
Professional mode.
• [On]: Enables HDMI-CEC feature in
Professional mode.
[USB break-in]
Enables or disables USB break-in feature in
Professional mode.
• [Off]: When USB is plugged in,
the [Multimedia] menu will not
appear automatically, but users can
access [Multimedia] menu from the
[Consumer setup] menu.
• [On]: When USB is plugged in,
the [Multimedia] menu appears
automatically.
[Enable teletext] (Only for selected models)
• [Off]: Disables teletext in Professional
mode.
• [On]: Enables teletext in Professional
mode.
[Blue mute]
Sets the background color when there is no
signal on TV.
• [Off]: The background color is set to
black.
• [On]: The background color is set to
blue.
[Digit Timeout]
Denes the time interval between numeric
buttons when users press digits on the remote
control. The duration is from 0.5 to 10 seconds.
When digit is pressed, the timer refreshes.
[Selectable AV]
Allows the installer to dene which external
sources to be displayed on the source list when
pressing SOURCE button on the Guest remote
control.
Only the sources marked with [X] appear in
the source list.
[ESP] (Energy saving program)
Selects the period of time to switch the TV off
automatically when TV does not receive any
user input. The time is between 0 to 24 hours.
Selects “0” to disable this feature.
Speaker Settings
[TV Speaker Enable]
• [Off]: Disables the TV speaker. The
headphone volume functions normally.
• [On]: The TV speaker is enabled.
(Default setting).
Note
• When the headphone is plugged in, the TV
speaker is muted automatically.
[Bathroom Speaker Volume]
• [0 ~ 10]: When the PBS mode is on,
adjust the volume from 0 to 10.
Note
• When the PBS mode is off, the volume
is xed.