Philips 32HFL5332 - Page 29

27
English
EN
PBS settings
[PBS Mode]
Enables / disables the Professional mode.
• [On]: All settings in the Professional
mode Setup menu are in effect.
• [Off]: The TV operates as a normal
(consumer) TV.
[Consumer Setup]
A shortcut to enter the full TV menu. This
allows the installers to do all the TV setup
settings.
[Store]
Selects [Yes] to save the changes in Professional
mode. Restarts the TV mains power for the
changes to take effect.
[Reset]
Selects [Yes] to reset all settings in Professional
mode and consumer mode to factory default.
Switch on setting
[Maximum volume]
This option species the maximum allowable
volume level of the TV.
[Picture format]
Sets available picture format when the TV is
switched on.
[Power on]
The power on function allows the TV to enter
a specic mode ([On], [Standby], or [Last
status]) of operation after the mains power is
activated.
• [On]: When set, the TV will always
turn on after the mains power is
activated.
• [Standby]: When set, the TV will
always turn to standby after the mains
power is activated.
• [Last status]: When set, the TV will
always turn to the last status (either
On or Standby) whenever the mains
power is activated.
[Smart power]
Adjusts the picture backlight to achieve the
following power saving mode.
• [Off]: Smart power is disabled.
• [Low]: The picture backlight is at low
power saving mode.
• [Medium]: The picture backlight is at
medium power saving mode.
• [High]: The picture backlight is at high
power saving mode.
[Switch on Vol]
When the installer switches the TV on, it will play
at the specied volume level.
• [Last status]: If [On] is selected, the TV
will be automatically switched to the
last volume status whenever the mains
power is turned on. (The volume level
can not exceed the [Maximum volume]
level).
• [User dened]: (Only appears when
you select [Last status] ≥ [Off]). The
installer can adjust his/her preferred
switch on volume level.
[Switch on Ch]
When the installer switches the TV on, it will play
at the specied channel.
• [Last status]: If [On] is selected, the TV
will be automatically switched to the
last channel status whenever the mains
power is turned on.
• [User dened]: (Only appears when
you select [Last status] ≥ [Off]). The
installer can choose his / her preferred
switch on channel.