Philips 355 - Call Barring

36 Settings
calls to this list via the Call restriction option.
This feature is subscription dependent and requires a
PIN2 code (see page 37).
Call restriction
Allows you restrict the calls to the Public
Names
list. In this case, you can only
access the names of the
Public names list,
as opposed to the phonebook
of the main menu.
This function is subscription dependent and requires
a PIN2 code (see page 37). Please note that when
activating this option, it might also apply to WAP and
e-mail connections over GPRS.
Public names
Allows you to consult and modify your
Public Names list. You can enter a new
name, modify or delete a name in the
list via PIN2 code. Use the
<New> option to enter the
name and phone number, then select the number
type:
Phone , Fax or Data . Names in this list can be
changed or deleted.
Call barring
This menu allows you to limit the use of
your phone to specific calls by letting
you bar both outgoing and incoming
calls. This function is network dependent and requires
a specific call barring password supplied by your
service provider.
Outgoing calls
The Outgoing menu allows you to select
between
All calls, International calls and
Intl. Exc. Home calls (the latter allowing
you to call your home country when you are abroad).
You can also
Deactivate the bar on outgoing calls.
These menus then allow you to bar, within each
available option,
All calls , Voice calls , Data calls or Fax
calls
.
Incoming calls
The Incoming menu allows you to select
All calls or When roaming . It also
provides access to the
Cancel menu to
remove bar on incoming calls.
These menus then allow you to bar, within each
available option,
All calls , Voice calls , Data calls or Fax
calls
.
Status
In each sub-menu (All calls, When
roaming, etc.), the
Status option allows
you to know whether a type of call is
barred or not.
Call restriction
Public names
Call barring
Outgoing
Incoming
Status