Philips 355 - Answer a Third Call; Conference Call

82 Operator services
phone emits an alert beep and the screen displays Call
waiting
.
To receive a second call, you must have:
- subscribed to this feature,
- deactivated the Call forward option for voice calls
(see page 71),
- activated the Call waiting option (see page 72).
If you receive a second call, press
, , then you can:
• accept the second call: the first one is put on
hold, the second one is active. If you want to
toggle between the two calls, press
, then select
Switch calls . Each time you toggle from one call
to another, the active call is put on hold and the
call which was on hold is then activated. To
introduce the new caller into a conference
press
, and select Conference .
• reject the second call
• end the active call, then your incoming call is
ringing.
Notes:
- If you also wish to answer the incoming call, press
( ; to reject it, press ) .
-
If you have activated call forwarding ‘If Busy’ (see
“Call forward” page 71), you will never receive second
calls since they are always forwarded when the line is
busy.
Subscription dependent
While in communication and one call being on hold,
you may receive a third call. The phone emits an alert
beep. You can either end one of the calls before being
able to answer the third one or introduce the calling
party into a conference (see below). This service is
limited to two current communications (one active
and one on hold).
Subscription dependent
You can activate the conference call by
making consecutive outgoing calls, or
create it from a multiparty call context.
You may have up to five members at the same time
and end the conference with
) . At this point all
calls are disconnected.
In order to make consecutive outgoing calls, first
initiate a normal call with the first number of the
conference. When the first member is on line, initiate
Answer a third call
Conference call
Conference