MMS 61
Bearer
This menu allows you to select the type of network
used when launching a connection.
If selecting
GPRS first
, you must have configured both
the GSM and GPRS settings (see “Access settings”
page 38).
MMS Centre
Allows you to enter or change the MMS address of the
server your phone will connect to.
Gateway address
Allows you to enter or change the IP address of the
server’s gateway.
Gateway port
Allows you to enter or change the Port number of the
server’s gateway.
You must have the information relating to the three
points above, supplied by your operator, and must
enter them exactly as given.
Application settings
Retrieval mode
GSM
Your mobile will only use the GSM
network for connections.
GPRS
Your mobile will only use the GPRS
network for connections.
GPRS first
Your mobile will first try to connect
to the GPRS network, then to the
GSM network if the GPRS network
isn’t available when connecting.
Manual
Messages are stored on the MMS server,
and you must connect manually to
retrieve them:
1.
Press
,
to access the
Inbox
.
2.
Select the notification item
corresponding to this message and
press
,
.
3.
Select
Read
and press
,
.
4.
When the
Details
of the message
are displayed, press
,
to launch
the connection and download it.
5.
Once the message is in your phone,
press
,
, select
Play message
and
press
,
.
To Next Page
Loading...
