Philips 55PFS8159 User Manual

2. Select TV settings > Ambilight > Ambilight+hue > View
configuration and press OK.
3. Select the item you want to view and press OK.
4. Press
,
repeatedly if necessary, to close the menu.
Advanced Ambilight settings
Wall colour
With Wall colour, you can neutralise the influence of a coloured
wall on the Ambilight colours. Select the colour of the wall
behind the TV and the TV will modify the Ambilight colours to
appear as they are intended.
To select the colour of the wall . . .
1. Press

and select Setup and press OK.
2. Select TV settings > Ambilight > Advanced > Wall
colour.
3. Select the colour sample that matches the colour of the
wall behind the TV and press OK.
4. Press

, repeatedly if necessary, to close the menu.
TV switch off
With TV switch off, you can set Ambilight to switch off
immediately or slowly fade out when you switch off the TV. The
slow fade out gives you some time to switch on the lights in
your living room.
To select the TV switch off . . .
1. Press

and select Setup and press OK.
2. Select TV settings > Ambilight > Advanced > TV switch
off.
3. Select Fade out to off or Immediate switch off.
4. Press

, repeatedly if necessary, to close the menu.
Lounge light mood
When the TV is on standby, you can switch Ambilight on and
create a Lounge light effect in your room.
To switch Ambilight on while the TV is on standby, press

(Ambilight).
To change the Lounge light colour range, press

(Ambilight) again.
To switch off Lounge light, press and hold

(Ambilight) for a
few seconds.
You can also set up the colour range in the TV settings menu.
1. Switch on the TV (out of the Lounge light mode).
2. Press

and select Setup and press OK.
3. Select TV settings > Ambilight > Advanced > Lounge
light mood and press OK.
4. Select the colour range you prefer.
5. Press

, repeatedly if necessary, to close the menu.
Lounge light+hue
setting is On or Off
only for bulbs in stby lounge mode
not used for active state
available…
1 - AL style is not Off
2 - TV and hue bridge connected
3 - Config = valid
72

Philips 55PFS8159 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	55 \
Display brightness	450 cd/m²
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	-
Supported video modes	1080p
Display diagonal (metric)	139 cm
Screen format adjustments	Zoom
Motion interpolation technology	PMR (Perfect Motion Rate) 800 Hz
RMS rated power	30 W
Number of speakers	3
Auto volume leveler	Yes
PC in (D-Sub)	No
HDMI ports quantity	4
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
Consumer Electronics Control (CEC)	EasyLink
Audio formats supported	AAC, MP3, WMA
Image formats supported	BMP, GIF, JPG, JPS, PNG, PNS
Video formats supported	3GP, AVC, AVI, H.264, MKV, MPEG1, MPEG2, MPEG4, VC-1, WMV9
Subtitle formats supported	MKV, SMI, SRT, SUB, TXT
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	69 W
Package depth	198 mm
Package width	1338 mm
Package height	917 mm
Package weight	28600 g
3D type	Active
3D glasses quantity	2
Annual energy consumption	96 kWh
Tuner type	Analog & digital
Analog signal format system	NTSC, PAL, SECAM
Digital signal format system	DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2
Video apps	Netflix, YouTube
Lifestyle apps	Facebook, Skype, Twitter
Product color	Silver
Panel mounting interface	200 x 200 mm
Cables included	AC
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Depth (with stand)	230 mm
Height (with stand)	774 mm
Weight (with stand)	22000 g
Depth (without stand)	13 mm
Width (without stand)	1225 mm
Height (without stand)	716 mm
Weight (without stand)	17200 g