EasyManuals Logo

Philips 55PUS8809 User Manual

Philips 55PUS8809
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
2.5
Antenna Cable
Insert the antenna plug firmly into the
Antenna
socket at the
back of the TV.
You can connect your own antenna or an antenna signal from
an antenna distribution system. Use an IEC Coax 75 Ohm RF
antenna connector.
Use this antenna connection for DVB-T and DVB-C input
signals.
2.6
Satellite Dish
One Tuner
To watch a satellite channel and to record another channel at
the same time, you must connect 2 identical cables from your
satellite dish to the TV. If you only have 1 cable available, the
channel you are recording is the only channel you can watch.
Connect the cable from the satellite dish directly to the
SAT 1
connection. Use a coaxial cable fit for connecting a satellite
antenna dish. Make sure your satellite dish is perfectly aligned
before you start the installation.
During the satellite installation, select
One Tuner
.
Two Tuners
To watch a satellite channel and to record another channel at
the same time, you must connect 2 identical cables from your
satellite dish to the TV.
Connect the first cable from the satellite dish directly to the
SAT
1
connection and connect the second cable to
SAT 2
. Use a
coaxial cable fit for connecting a satellite antenna dish. Make sure
your satellite dish is perfectly aligned before you start the
installation.
During the satellite installation, select
Two Tuners
.
Unicable or MDU
If you use a Unicable system, connect the cable to the
SAT
1
connection. Use a coaxial cable fit for connecting a satellite
antenna dish. Make sure your satellite dish is perfectly aligned
before you start the installation.
During the satellite installation, select
Two Tuners
and
later
Unicable
.
7

Table of Contents

Other manuals for Philips 55PUS8809

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Philips 55PUS8809 and is the answer not in the manual?

Philips 55PUS8809 Specifications

General IconGeneral
Screen shapeFlat
Response time- ms
Display diagonal55 \
Display brightness450 cd/m²
Native aspect ratio16:9
LED backlighting type-
Supported video modes1080p
Display diagonal (metric)139 cm
Screen format adjustmentsZoom
Motion interpolation technologyPMR (Perfect Motion Rate) 1000 Hz
RMS rated power30 W
Number of speakers2
Auto volume levelerYes
PC in (D-Sub)No
HDMI ports quantity4
DVI-D ports quantity0
USB 2.0 ports quantity3
Component video (YPbPr/YCbCr) in1
Consumer Electronics Control (CEC)EasyLink
Package depth198 mm
Package width1338 mm
Package height934 mm
Package weight31700 g
Product colorSilver
Panel mounting interface400 x 400 mm
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.3 W
Power consumption (typical)135 W
3D typeActive
Ambient lighting type3-sided
Annual energy consumption187 kWh
Tuner typeAnalog & digital
Analog signal format systemNTSC, PAL, SECAM
Digital signal format systemDVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2
Video appsYouTube
Lifestyle appsFacebook, Skype, Twitter
Audio formats supportedAAC, MP3, WMA
Image formats supportedBMP, GIF, JPG, JPS, PNG, PNS
Video formats supported3GP, AVC, AVI, H.264, MKV, MPEG1, MPEG2, MPEG4, VC-1, WMV9
Subtitle formats supportedMKV, SMI, SRT, SUB, TXT
Operating temperature (T-T)5 - 35 °C
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)230 mm
Width (with stand)1280 mm
Height (with stand)768 mm
Weight (with stand)25400 g
Depth (without stand)38 mm
Width (without stand)1240 mm
Height (without stand)713 mm
Weight (without stand)24800 g

Related product manuals