Philips 6000 Series - Starting of Cleaning

16
English
Starting of cleaning
•
Initial charging: Before the rst use, turn on the power switch at the bottom of the main unit and put it
in the docking station for full charging, so as to ensure the robot can complete initial cleaning properly.
•
Starting of cleaning: To better build a home map, it is recommended to remove the mop components
of the main unit before the rst use. Put the main unit in the docking station. Press the Start button on
the main unit or the App to build a map for cleaning purpose. After initial map building and cleaning,
put back the mop components onto the main unit. Press the Start button on the main unit or the App to
enable the mopping mode. Before entry into the mopping mode, the docking station will enable mop
washing. After washing, it will enter the mopping mode to start cleaning from the farthest room to the
nearest.
•
Pausing of cleaning: During cleaning, press the Start button or the Start button on the App to pause
cleaning.