Philips 6000 Series - Mop Maintenance

20
English
•
Use clean water to rinse the dust bin and lter, and then shake o the water droplets on the dust bin and
lter.
Note: After cleaning, leave the dust bin and lter to dry thoroughly before reinstallation for use.
•
Dry the dust bin and lter after shaking o the water droplets.
Mop maintenance
•
Remove the mop assembly and tear o the mop. Rinse the mop assembly with clean water. Do not scrub
the mop vigorously, so as to avoid damage. After cleaning, leave the mop assembly and mop to dry
thoroughly before reinstallation for use.