Philips 6000 Series - Cleaning of Sensors and Charging Contacts; Cleaning of Water Tank and Docking Station

23
English
Cleaning of sensors and charging contacts
•
Clean the sensors of the robot regularly. Remove any dust on them with a dry cloth or bird brush.
Cli sensor
•
Clean the charging contacts of the robot regularly. Remove any dust on them with a dry cloth or bird brush.
Note: Do not wipe the charging contacts with a wet cloth, so as to avoid damage.
Charging contact
Cleaning of water tank and docking station
Cleaning of water tank
•
Drain the dirty water. Open the dirty water cover lid to drain the dirty water from the tank.
Drain
the dirty
water