Philips AC3259 - Filter Type Change

12 EN
Filter type change
1 Touch and for 3 seconds to
enter the filter type change mode
(fig.€).
» Code (A3) of the NanoProtect
filter Series 3 displays on the
screen.
2 Touch to select the filter code of
the new filter you will use (fig.).
3 Touch and hold for 3 seconds to
confirm the filter code of the new
filter (fig.‚).
Note
• After you have selected the filter code
of the new filter using the button,
if you do not touch any other buttons
in 10 seconds, the appliance will
automatically confirm the filter code of
the new filter.
4 "--" displays on the screen after the
new filter code is confirmed (fig.ƒ).
» If you do not have a second
filter to use in the appliance,
touch and hold for
3 seconds to confirm and exit
the filter type change mode
(fig.„).