Philips AC3259 - Light and Display Control; Display Mode Switching; Cleaning and Maintenance; Cleaning Schedule and Methods

7EN
English
Note
• After the appliance is switched off by
the on/off button , if the plug is still
in the power socket, the appliance will
operate under the previous settings
when it is switched on again.
Changing the Auto mode
setting
You can choose the Pollution mode
( ), the Allergen mode ( ) and the
Bacteria/Virus mode ( ).
Pollution mode
The specially designed pollution
mode can effectively remove airborne
pollutants such as PM2.5.
• Touch the Auto mode button to
select the Pollution mode (fig.l).
» Auto(A) and display on the
screen.
Allergen mode
The specially designed Allergen mode
can effectively remove common
allergens such as pollen and pet dander.
• Touch the Auto mode button to
select the Allergen mode (fig.m).
» Auto(A) and display on the
screen.
4 Using the
appliance
Understanding the air
quality light
PM2.5
level
Air quality
light color
Air quality
level
≤12 Blue
Good
13-35 Blue-Purple
Fair
36-55 Purple-Red
Poor
>55 Red
Very poor
The air quality light automatically goes
on when the appliance is switched on,
and lights up all colors in sequence.
In a short time the air quality sensors
select the color that corresponds to the
ambient air quality.
Switching on and o
1 Put the plug of the appliance in the
power socket.
2 Touch to switch on the
appliance (fig.j).
» The appliance operates under
the auto mode by default.
» After measuring the air quality
for a short time, the air quality
sensor automatically selects the
color of the air quality light.
» After measuring the particle
matters in the air, the
icon and the PM2.5 level are
displayed on the screen. (fig.k).
3 Touch and hold for 3 seconds to
switch off the appliance.