Philips AC3833 - Cleaning Schedule; Cleaning the Body of the Air Purifier; Cleaning the Particle Sensor

33EN
Cleaning schedule
Frequency Cleaning method
When necessary
Wipe the fabric part of the
appliance with a damp cloth,
wipe the plastic part of the
appliance with a soft, dry cloth�
Clean the air outlet cover
Every two
months
Clean the particle sensor with a
dry cotton swab
When displays
on the screen
Clean the surface of the lter
Cleaning the body of the air purier
1 Wipe the fabric surface gently with a damp cloth (for AC3836 only)�
2 Use a soft, dry cloth to clean both the interior and exterior of the air
purier and the air outlet�
Note:
• The fabric covered on the appliance can not be removed�
• Do not use hot water, alcohol, harsh cleaners to clean the fabric�
Cleaning the particle sensor
Clean the particle sensor every two months for optimal functioning of the
appliance�
Note:
• If the air purier is used in a dusty environment, it may need to be cleaned
more often�
• If the humidity level in the room is very high, condensation may develop
on the particle sensor and the air quality light may indicate a more poor air
quality even though the air quality is actually good� If this occurs, clean the
particle sensor�
• The gas sensor doesn't need to be cleaned�
PM2.5
IAI Gas