Philips AC3833 - Cleaning the Surface of the Filter

34 EN
1 Switch o the air purier and unplug from the power socket�
2
3
5
2 Pull the back cover and remove it from the appliance�
3 Clean the particle sensor with a damp cotton swab�
4 Dry all parts thoroughly with a dry cotton swab�
5 Reattach the back cover�
Cleaning the surface of the lter
Filter alert light status Action
The lter cleaning alert
displays on the screen
Clean the surface of the lter with a vacuum
cleaner
1 Switch o the air purier and unplug from the power socket�
2 3 4 5 6
2 Pull the back cover and remove it from the appliance�
3 Pull the lter from the appliance�
4 Clean the surface of the lter with a vacuum cleaner�
5 Put the lter back into the appliance�
6 Reattach the back cover�
IAI Gas
PM2.5
Clean surface
of
lter and
long press
to reset.