Philips AC3833 - Replacing the Filter

35EN
7 Put the plug of the air purier in the power socket�
8 Touch the button to switch on the appliance�
9 Touch and hold the lter status check/reset button
for 3 seconds to reset the lter cleaning time�
» The screen displays a message "Filter cleaning
completed"�
10 Wash your hands thoroughly after cleaning the lter�
Replacing the lter
Understanding the healthy protection lock
This air purier is equipped with a lter replacement indicator to make sure
that the air purication lter is in optimal condition when the air purier is
operating� When the lters need to be replaced, the lter replacement alert
lights up red�
If the lter is not replaced in time, the air purier will pop up a message to
indicate that the lter needs to be replaced, then the air purier will stop
operating and automatically lock to protect the air quality in the room�
Replace the lters as soon as possible according to the lter code�
Replacing the lter
Note:
• The lter is not washable or reusable�
• Always turn o the air purier and unplug from the electrical outlet before
replacing the lter�
Filter alert light status Action
The lter replacement alert
lights up
Replace the NanoProtect lter Pro S3
(FY4150/00)
Filter
cleaning completed.
IAI Gas
PM2.5
Change lter
then long
press to
reset
lter
Change lter
then long
press to
reset
lter