Philips AC3858/50 - Troubleshooting; Filter Reset; Storage

13EN
English
7 Put the plug of the air purier in the power socket.
8 Touch the button to switch on the appliance.
9 Touch and hold the lter status check/reset button for 3 seconds to
reset the lter lifetime counter (g x).
10 Wash your hands thoroughly after replacing the lter.
Note: Do not smell the lter as it has collected pollutants from the air.
Filter reset
You can replace the lter even before lter replacement alert ( ) displays on
the screen. After replacing a lter, you need to reset the lter lifetime counter
manually.
1 Touch the power button for 3 seconds to turn o the appliance and
unplug from power socket.
2 Put the power plug in the power socket.
3 Within 15 seconds after power on, touch and hold and button for
3 seconds to reset the lter lifetime counter (g y).
6 Storage
1 Turn o the air purier and unplug from the power socket.
2 Clean the air purier, particle sensor and the surface of the lter (see
chapter "Cleaning and maintenance").
3 Let all parts air dry thoroughly before storing.
4 Wrap the lter in air tight plastic bags.
5 Store the air purier, lter in a cool, dry location.
6 Always thoroughly wash hands after handling the lter.
7 Troubleshooting
This chapter summarizes the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the information
below, contact the Consumer Care Center in your country.