Philips AC4081/80 - Cleaning Schedule; Clean the Body of the Appliance; Clean the Air Quality Sensor; Cleaning

17
EN
English
English
5 Cleaning
Note
• Always unplug the appliance before you
clean it.
• Never immerse the appliance in water or
any other liquid.
• Never use abrasive, aggressive, or
flammable cleaning agents such as
bleach or alcohol to clean any part of
the appliance.
• Only the pre-filter and humidification
filter are washable. The air purifier filter is
not washable nor vacuum cleanable.
Cleaning schedule
Frequency Cleaning method
When
necessary
Wipe the surface of the
appliance with a soft dry
cloth.
Every week
Rinse the humidication lter.
Rinse the water tank.
When the
filter replace
indicator /
lights up
Clean the pre-filter.
Descale the
humidification filter
with the vinegar-water
mixture.
Every two
months
Clean the air quality
sensor and air humidity
sensor with a dry cotton
swab.
Clean the body of the
appliance
Regularly clean the inside and outside
of the appliance to prevent dust from
collecting.
1 Wipe away dust with a soft dry cloth
from the body of the appliance.
2 Clean the air inlet and the air outlet
with a soft dry cloth.
Clean the air quality
sensor
Clean the air quality sensor every two
months for optimal functioning of the
appliance. Clean it more frequently
if you use the appliance in a dusty
environment.
Note
• When the humidity level in the
room is very high, it is possible that
condensation develops on the air
quality sensor. As a result, the air quality
light may indicate that the air quality is
bad even though the air quality is good.
In this case you have to clean the air
quality sensor or use one of the manual
speed settings.
1 Clean the inlet and outlet of the air
quality sensor with a soft brush.