9
3 Getting started
Install filters
The appliance comes with all filters
fitted inside. Remove the packaging
of the filters before you can use the
appliance. Remove all filters, unpack
them, and place them back into the
appliance described as follows:
Tip
• When you remove or insert filters, place
the appliance against a wall for more
stability.
Note
• Insert the filters in the correct position.
• Make sure that you place filter 2 in the
appliance first and then the pre-filter.
• Make sure that the side with the tag is
pointing towards you.
1 Unlock the bottom of the front
panel from the appliance, then
gently pull the top part of the front
panel towards you.
2
1
2 To remove the pre-filter, press the
two clips down and pull the filter
towards you.
3 Remove filter 2 from the appliance.
2
2
AC4080 AC4081
4 Remove the packaging materials of
filter 2.
To Next Page
Loading...
