Philips AC4081 - Using the Appliance; Understand the air quality light; Switch on and off the appliance

10
EN
4 Using the appliance
Understandtheairquality
light
Coloroftheairquality
light
Airqualitylevel
Blue Good
Purple Fair
Red Bad
The air quality light automatically goes on
when the appliance is switched on, and
shows all colors repeatedly. In a short while
the air quality light selects the color that
corresponds to the ambient air quality.
Note
• The built-in air quality sensor measures the air
quality and automatically selects the appropriate
color of the air quality light. When the air is
clean, the color of the air quality light is in blue.
When the air quality deteriorates, the color of
the air quality light changes to purple or red.
Switchonandoffthe
appliance
The appliance operates under air purication
combined with humidication by default.
1 Put the plug into the wall socket.
» All lights go on once and then go out
again.
2 Press to switch on the appliance.
» The PURIFY and HUMIDIFY lights are
on.
» After measuring the air quality for
a short while, the air quality sensor
automatically selects the appropriate
color of the air quality light.
» The appliance enters AUTO mode,
and the target humidity level is 50% by
default.
3 Press for 2 seconds to switch off the
appliance.
2”