Philips AC4081 - Change the fan speed

12
EN
• AUTO and one of the fan speed indicators
( , or ) light up.
Note
• In AUTO mode, when the air quality reaches
the target (air purication only mode), or when
the air quality and humidity reach the target
simultaneously (combi mode), the appliance will
work with a lower fan speed, and the fan speed
indicator ( , or ) goes out.
Fanspeedlight Sensitivitylevel
+ standard
sensitive
extra sensitive
4 Press the fan speed button to adjust the
sensitivity level of the air quality sensor.
5 Press and hold for 2 seconds to save
the setting and switch off the appliance.
Note
• When you are changing the sensitivity level, if
you do not change any settings, or if you do not
press for 2 seconds after you have changed any
settings, the appliance will resume normal work
without saving any changes.
• After the sensitivity is changed and saved, the
appliance automatically starts operating at the
preset sensitivity level whenever you switch on
the appliance.
Changethefanspeed
AUTO
In AUTO mode, the appliance selects the
appropriate fan speed in accordance with the
ambient air quality.
• Press the fan speed button
to select
AUTO mode.