Philips AC4081 - Change the working mode; Set the sensitivity of the air quality sensor

11
EN
English
English
Note
• After the appliance is switched off by the on/
off button , if the plug is still in the power
socket, the appliance will resume working
based on the last settings when it is
switched on again.
Changetheworkingmode
Besides operating under air purication
combined with humidication, the appliance can
also work under air purication only mode.
1 After the appliance is switched on,
press
once.
» The HUMIDIFY and humidity level
indicators go out.
» The humidication function is
deactivated. The appliance works under
air purication only mode.
2 Press again to activate the humidication
function.
Note
• In air purication only mode, the humidication
button does not respond.
• The appliance cannot work under humidication
only mode.
Setthesensitivityoftheair
qualitysensor
This appliance allows you to adjust the
sensitivity of the air quality sensor. There are
three sensitivity levels:
• standard (default setting)
• sensitive
• extra sensitive
You can adjust the sensitivity of the air quality
sensor in the following way:
Note
• When the appliance is set to a higher sensitivity,
the purier becomes more allergic to the
pollutants in the air. When the purier is in
AUTO mode, it is more likely to choose a higher
fan speed than the standard mode. The air
quality sensor selects the appropriate color of
the air quality light in accordance with the higher
sensitivity.
1 Unplug the appliance.
2 After a short while, put the plug in the wall
socket again.
3 Press and hold the fan speed button
and humidier button
simultaneously
for3seconds.
» One or more fan speed lights ash to
show the current sensitivity level of the
air quality sensor.
3”