Philips AC4081 - Set the humidity level; Set the child lock

14
EN
To deactivate the timer function, press the timer
button
repeatedly until the timer light ( ,
or
) goes out.
Setthehumiditylevel
Note
•
Make sure that the water tank is lled with
water when you want to use the humidication
function (see the chapter "Get started", section
"Prepare for humidication").
• Press the humidity button once or
more times to set the desired air humidity
to 40%, 50% or 60%.
» The corresponding humidity light (40%,
50% or 60%) starts to ash.
» When the appliance reaches the target
humidity level, the humidity level
indicator remains on.
Note
• If you want to increase the humidity level in
shorter time, you can select a higher fan speed.
Setthechildlock
Note
• Child lock is only applicable for AC4081.
• Press and hold the fan speed button
and timer button
simultaneously for
3 seconds to activate child lock.
3”
» When the child lock is on, all buttons
are not responsive.
• Press and hold the fan speed button
and timer button
simultaneously for
3 seconds again to deactivate child lock.
3”
Note
• When the child lock is on, the appliance will not
respond when you press any button.