Philips AC4081 - Getting Started; Install filters

7
EN
English
English
3 Gettingstarted
Installlters
The appliance comes with all lters tted
inside. Remove the packaging of the
lters before you can use the appliance.
Remove all lters, unpack them, and place
them back into the appliance described as
follows:
Tip
• When you remove or insert lters, place the
appliance against a wall for more stability.
Note
• Insert the lters in the correct position.
• Make sure that you place lter 2 in the appliance
rst and then the pre-lter.
• Make sure that the side with the tag is pointing
towards you.
1 Unlock the bottom of the front panel from
the appliance, then gently pull the top part
of the front panel towards you.
2
1
2 To remove the pre-lter, press the two
clips down and pull the lter towards you.
3 Remove lter 2 from the appliance.
2
2
AC4080 AC4081
4 Remove the packaging materials of lter 2.