Philips AC5659 - Child Lock Function; Cleaning and Maintenance

10 EN
5 Cleaning
Note
• Always turn the air purifier off and
unplug from the electrical outlet
before cleaning.
• Never immerse the air purifier in water
or any other liquid.
• Never use abrasive, aggressive, or
flammable cleaning agents such as
bleach or alcohol to clean any part of
the air purifier.
• Only the pre-filter is washable. The air
filters are not washable.
• Do not attempt to clean the filters or
air quality sensor with a vacuum.
Cleaning the body of the
air purier
Regularly clean the inside and outside
of the air purifier to prevent dust from
collecting.
1 Use a soft, dry cloth to clean both
the interior and exterior of the air
purifier.
2 The air outlet can also be cleaned
with a dry, soft cloth.
3 Touch the light on/off button for
3 seconds again to switch to Gas
level display (fig.t).
» The Gas indicator and the
actual Gas level display on the
screen.
Note
• It is possible that the air quality light
may still be red even if the PM2.5
index is very low. It's normal. This is
because that at least one of the index
( the IAI index or Gas level) is high that
turns the air quality light to red. The
appliance real-time displays the air
quality index with the highest risk.
Setting the child lock
1
Touch and hold the child lock
button
for 3 seconds to activate
child lock (fig.u).
» The child lock icon
displays
on the screen.
» When the child lock is on,
all the other buttons are not
responsive.
2 Touch and hold the child lock
button
for 3 seconds again to
deactivate child lock.
» The child lock icon
disappears.
Note
• You can still control the appliance
through the App even child lock is
activated.