Philips AC6678 - 3 Getting Started; Installing Filters

30 EN
3 Getting started
Installing lters
Remove all packaging of the lters
before using the appliance. Unpack
them and place them into the
appliance described as follows:
Note
• Make sure the air purier is
unplugged from the electrical
outlet before installing the
lters.
• There is one set of lters on
each side of the appliance.
Each side is equipped with one
pre-lter and one air purication
lter.
• Make sure that you place the
air purication lter in the
appliance rst and then the pre-
lter.
• Make sure that the side with
the tag is pointing towards you
when installing lters.
1 Remove all packaging materials
of the air purication lters.
2 Pull the top part of the side
panel to remove it from the
appliance.
3 Press the two clips down and
pull the pre-lter towards you.
4 Put the unpacked air purication
lter back into the appliance.