Philips AC6678 - Wi-Fi Indicator; Wi-Fi Connection

English
31EN
5 Put the pre-lter back into the
appliance.
Note
• Make sure the side with the two
clips is pointing towards you,
and that all hooks of the pre-
lter are properly attached to
the purier.
6 To reattach the side panel,
mount the panel onto the
bottom of the appliance rst
(1). Then, gently push the
panel against the body of the
appliance (2).
7 Repeat the above steps and
assemble the lter for the other
side of the appliance.
Wi-Fi indicator
Color Status
Orange
(blinking)
Adding a device
White
Conntected to the
server
White
(blinking)
Connecting to the
server
O Wi-Fi function disabled
Wi-Fi connection
Note
• If you want to connect more
than one air purier to your
smart device, you have to do
this one by one. Complete the
set up of one appliance before
you turn on the other appliance.
• Make sure the distance between
your air purier and Wi-Fi router
is less than 10m without any
obstruction.
• If the air purier installed at
room corner has a weak Wi-Fi
signal, it's recommended to set
Wi-Fi booster for remote usage.