How to fix Philips ADD5980M safety lock if it does not work?
If the safety lock on your Philips Water Dispenser does not work, it is possible that the safety lock function is turned off. Long press the safety lock button for 10 seconds to turn it on.
Why is my Philips ADD5980M Water Dispenser not dispensing hot water?
If your Philips Water Dispenser isn't dispensing hot water, first, make sure it’s properly plugged in and turned on. Next, check if there's water in the tank and fill it if needed. Also, verify that the dispense button isn't locked by pressing the safety lock button. Finally, the appliance may require descaling, so descale it according to the instructions in chapter 5.
General| Brand | Philips |
|---|---|
| Model | ADD5980M |
| Category | Water Dispenser |
| Language | English |
Explains the functions of buttons and indicators on the appliance's control panel.
Lists key technical details of the water dispenser, including model, voltage, and power.
Provides guidance on where to place the water dispenser for optimal and safe operation.
Step-by-step instructions for operating the water dispenser, including dispensing water.
Detailed steps for initial cleaning and preparation of the water dispenser and filter.
Guidelines for regular cleaning of the water dispenser's removable parts and exterior.
Instructions on how to descale the appliance to maintain efficiency and prevent mineral buildup.
Information on when and how to replace the filter cartridge for optimal performance.
To Next Page
