Positioning of appliance
• Do not install this appliance in a very damp or hot place, near heat source.
• Place appliance on a at and even surface.
• Do not use this appliance outdoors. This appliance is only suitable for use indoors.
• WARNING: DO NOT INSTALL THIS APPLIANCE IN DIRECT SUNLIGHT.
• Ensure that the ventilation on both sides is never blocked or covered.
Fill water tank through to the “MAX” mark; water will ow through the lter at a set rate and
may take some time due to the action of the lter cartridge.
1. Plug in. Press the Power Button. The power button will light up and the appliance is ready
to work. (A-1)
2. Adjust the height of the drip tray to accommodate the size of the mug used. There are 2
height options. (A-2)
3. Place mug or glass on drip tray.
4. Select the desired temperature and volume. (A-3)
5. Press the Safety Lock Button to unlock the appliance (not applicable for chilled water). (A-4)
6. Press the Dispense Button to start dispensing. (A-5)
4. How to use
A-1
A-4 A-5
A-2 A-3
EN 28
To Next Page
Loading...
