Philips AE8000 - 7 System Settings Menu; Network and Time;Date Configuration

18 EN
7 Use system
settings menu
1 In working mode, press to access the
menu.
2 Press / repeatedly to select [System
settings].
3 Press OK to conrm.
4 Repeat steps 2 to 3 to select an option.
• [Network]: enable you to establish
network connection.
• [Time/Date]: set time and date.
• [Language]: select system language.
• [Factory Reset]: reset the radio to
factory default status.
• [Software update]: check the software
update information.
• [Software Upgrade]: update software
if necessary.
• [Setup wizard]: instruct you to
perform initial setup.
• [Info]: know software version.
• [Backlight]: adjust backlight settings.
Note
• If no button is pressed within 15 seconds, the menu
exits.
Adjust network settings
1 Select [System settings]>[Network].
2 Press / to select an option or sub-
option, then press OK to conrm.
• [Network wizard]: instruct you to establish
network connection.
Time/Date
Language
Factory Reset
Software update
System settings
Network
• [PBC Wlan setup]: select this option if
your wireless router supports WPS and
PBC setup method.
• [View settings]: view the current network
information.
• [Wlan region]: select Wlan region.
• [Manual settings]:
• [DHCP enable]: allocate IP address
automatically.
• [DHCP disable]: allocate IP address
manually.
• [Network prole]: display a list of the
networks remembered by the radio.
• [Keep network connected?]: select
whether to keep the network connected.
Set time/date
1 Select [System settings]>[Time/Date].
2 Press / to select an option or sub-
option, then press OK to conrm.
• [Set Time/Date]: set time and date.
• [Auto update]:
• [Update from DAB]: synchronize time
with DAB stations.
• [Update from FM]: synchronize time
with FM stations.
• [Update from Network]: synchronize
time with Internet radio stations.
• [No update]: deactivate time
synchronization.
• [Set format]: set 12/24 hour format.
• [Set timezone]: set timezone.
• [Daylight savings]: activate or deactivate
daylight saving time.
Auto update
Set format
Set timezone
Daylight savings
Time/Date
Set Time/Date