Philips AJ7010 - Set alarm timer; Set alarm

1 Press NATURE SOUND.
2 Rotate the knob to select a nature sound.
3 Presstheknobtoconrm.
4 Rotate the knob to adjust the volume level of the nature sound
(0-8).
Tip
• To deactivate the nature sound, press the knob again.
Set alarm timer
Set alarm
You can set two alarms to ring at different time.
Note
• Make sure that the clock is set correctly.
1 In standby mode, press and hold AL1/AL2 for two seconds to
activate alarm setting mode.
» The hour digits and [AL1]/[AL2] begin to blink.
2 Rotate the main knob to adjust hour.
3 Pressthemainknobtoconrm.
» The minute digits and [AL1]/[AL2] begin to blink.
4 RepeatStep2-3tosetminute.