Philips Avent SCD921 - Page 10

- 10 -
Philips Avent Baby Monitor
1.5s
5 Press the on/o button for 1.5 seconds to turn on the parent unit.
Philips Avent Baby Monitor
- The display turns on, the Philips shield appears on the display and
the link light turns red� The parent unit starts to search for the baby
unit�
Video 20.3
o
C
- When the parent unit and baby unit are linked, the link light turns
white on the parent unit and one or more signal strength bars
appear on the display�
--.-
o
CVideo
?
Note: It takes about 15 seconds to establish the link between the
parent unit and the baby unit�
- Make sure that the baby unit is switched on. When thebaby unit
is switched o, the display of the parent unit will show the out of
range image�
- If no connection has been established, the link light turns red, the
parent unit alert will sound every 20 seconds and the out of range
image appears on the display�