Philips Avent SCD921 - Using the Baby Monitor; Linking Parent and Baby Units

- 9 -
Using the baby monitor
Linking parent unit and baby unit
1.5s
1 Press the on/o button for 1.5 seconds to turn on the baby unit.
2 When the baby unit is on, the indicator light turns orange for booting-
up�
3 The baby unit is ready for use when the indicator light turns green, you
can now connect it with the parent unit�
>2.5m/8.2 ft
4 Make sure that the parent unit and the baby unit are at least
2.5 meters/ 8.2 feet away from each otherto avoid acoustic feedback.