3-4
PCS 107 276
∑
Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before or during
playback. The play modes can also be combined with PROG.
SHUFFLE
- tracks of the entire CD/ programme are played in
random order
SHUFFLE
and
REPEAT ALL
- to repeat the entire CD/ programme
continuously in random order
REPEAT ALL
- to repeat the entire CD/ programme
REPEAT
- to play the current track continuously
1.
To select your play mode, press CD MODE
(
for AZ2035 model only:
or on the remote control SHUFFLE or
REPEAT) before or during playback until the display shows the
desired function.
2.
Press PLAY 2; to start playback if in the STOP position.
3.
To return to normal playback, press CD MODE (
for AZ2035
model only:
or on the remote control the respective SHUFFLE or
REPEAT key) until the various SHUFFLE/ REPEAT modes are no
longer displayed.
– You can also press
STOP 9
to cancel your play mode.
Note: In SHUFFLE mode, the display shows rapid patterns e.g.
, when the CD player selects a random track
number.
Programming track numbers
In the STOP position, select and store your CD tracks in the desired
sequence. If you like, store any track more than once.
Up to 20 tracks can be stored in the memory.
1.
Use the SEARCH ∞ or § on the set, (
for AZ2035 model only:
or on the remote control
¡ or ™
) to select your desired track
number.
2.
Press PROG.
™ Display:
PROGRAM
and the selected track number.
appears briefly.
™ If you attempt to programme without first selecting a track
number, or scrolls across the display.
3.
Repeat steps 1-2 to select and store all desired tracks.
™ is displayed if you attempt to programme more than
20 tracks.
4.
To start playback of your CD program, press PLAY 2;
(
for AZ2035 model only:
or on the remote control 2;).
LOW
BATT
LOW
SHUFFLE
REPEAT ALL
INSTRUCTION FOR USE
2.
Press OPEN•CLOSE to open the CD compartment.
™ Display: when you open the CD compartment.
3.
Insert a CD with the printed side facing up and press
OPEN•CLOSE to close the CD compartment.
™ Display: the CD player scans the contents of a CD, and then the
total number of tracks and playing time are shown.
Display: is shown if you have inserted a
non-finalized CD-R(W).
4.
Press PLAY 2; (
for AZ2035 model only:
or on the remote control 2;) to start playback.
™ Display: Current track number and elapsed playing time of the
track during CD playback.
5.
To pause playback press PLAY 2;.
Press PLAY 2; again to resume play.
™ Display: the elapsed playing time flashes when playback is on
pause.
6.
To stop CD playback, press STOP 9.
Note: CD play will also stop when:
– the CD door is opened;
– the CD has reached the end
– you select another source:
TAPE
or
TUNER
.
Selecting a different track
• Press SEARCH ∞ or § on the set, (
for AZ2035 model only:
or on the remote control ¡ or ™) once or repeatedly until the
desired track number appears in the display.
• If you have selected a track number shortly after loading a CD or
in the PAUSE position, you will need to press PLAY 2;
(
for AZ2035 model only:
or on the remote control 2;) to start
playback.
Finding a passage within a track
1.
Press and hold down SEARCH ∞ or §
(
for AZ2035 model only:
or on the remote control 5 or 6).
™ The CD is played at high speed and low volume.
2.
When you recognize the passage you want, release
SEARCH ∞ or §.
– Normal playback continues.
Note: During a CD programme or if SHUFFLE/ REPEAT is active,
searching is only possible within a track.
BATT
LOW
PLAY
STOP
CD MODE
¥ ¥ ¥ SEARCH
SEARCH ¥ ¥ ¥
PROG
BAND
FM
STEREO
BA
To Next Page
Loading...
