DAB RADIO
13
AZ 6000/05 page 13
1. Press PRESET 3,4 (or
PRESET -, +
on the remote control) once or
more to find your desired preset.
= Display shows: current station name at the top display line and
available presets at the bottom.
2. Press ENTER to confirm.
= Your desired preset radio station plays.
You can view the DAB service info in the following 7 information
modes. Depending on the DAB radio station you are tuning to, some
information modes may be unavailable.
• To scroll through the information options, press MODE repeatedly
until your desired option appears.
= 1
st
display line: current station name
2
nd
display line: selected service info
1. DLS (Dynamic Label Segments)
– Displays the scrolling broadcasting text (in default setting).
2. Program Type – Describes content type (e.g. jazz, pop)
3. Multiplex Name – Specifies the multiplex of current service. (A multiplex is a group of
stations broadcast by a multiplex
operator.)
4. Date and Time – Shows the date & time of current
multiplex.
5. Channel & Frequency – Displays the channel and central frequency of current multiplex
6. Bit Rate and Audio Status – Displays the transmission rate of broadcasting date in bits per
second (kbps);
– Display the audio status of current
service in stereo or mono.
7. Signal Error Rate – Indicates signal quality:
0-15: Good; 16-30: Acceptable; 30
or more: Poor.
VIEWING THE SERVICE INFO
To Next Page
Loading...
