DAB RADIO
1. Press STANDBY ON
y
to on, then press Source selector to
select DAB (or press DAB on the remote control).
= Display shows Welcome to Digital Radio, followed by
and/or .
= The list of available stations is created/restored, and the set
tunes to the last station detected / selected.
= The name of current station is shown in the 1
st
display line.
The broadcasting text, if available, scrolls in the 2
nd
display line
(DLS in default setting).
Helpful hints:
The first time you tune this DAB
– If the tuning fails, the display shows for 5 seconds
and appears.
• Press left/right 1,2 once or more (or
5
,
6
on the remote control)
enter Autoscan full (see Chapter TUNING/RETUNING)
Next time you tune into DAB
– If the tuning fails, the display shows or
.
= Retuning to alternative services/frequency starts automatically.
= A dot appears in the screen every 0.5 second.
= After successful tuning, the station name appears and
broadcasting text scrolls.
– If retuning also fails, the display shows or
. You can either
• Use Autoscan to refresh the list of available stations (see chapter RESETTING)
or
• Press ENTER to go to a tuning indication (see chapter TUNING/RETUNING, To improve
reception).
DAB RECEPTION
9
AZ 6000/05 page 9
To Next Page
Loading...
