Philips AZ9040 - Programming Track Numbers

usiiêua
5 x NORMAL (no display indication) to cancel the
SHUFFLE and REPEAT modes.
In the PROGRAM REPEAT ALL mode (if the word
PROGRAM is also visible on the display) only the titles
stored in the memory will be played.
The mode PROGRAM SHUFFLE is not possible. The
word PROGRAM will disappear when the next title is
reached.
To cance! the REPEAT and SHUFFLE modes, choose
NORMAL mode (no display indication).
All the tracks of the disc can be randomly played.
e Press SHUFFLE*REPEAT once on the main unit before
or during play.
SHUFFLE
— The display shows SHUFFLE and playback starts with
a track which has been randomly selected.
— During play you can use NEXT »» to select another
random track, or #« PREVIOUS to play the same
track again.
e Press SHUFFLE-REPEAT five times (no display indica-
tion) if you wish to return to normal play.
PROGRAMMING TRACK NUMBERS
" You may select a number of tracks and store these in the
memory in the desired sequence. When playing, you will
only hear the stored titles in the selected sequence. At
most, 20 tracks can be stored in the memory. You may
store each track more than once.
Manual selecting
e Select the desired track using the «« PREVIOUS and
NEXT »» buttons until the display shows the required
track number.
e Store this track by pressing PROGRAM.
e Select and store in this way all desired titles.
Storing during PLAY
e During normal PLAY you may store the running title by
pressing PROGRAM.
— After pressing PROGRAM the character F (PRO-
GRAM) appears, indicating that the track has been
stored.
PROGRAM
— Store all desired titles in the required sequence. You
may store each track more than once.
— At most, 20 tracks can be stored in the memory.
When the memory is full, the character £ (FULL)
appears.
— Whenpressing PROGRAM for longer than 1 second,
the display will show in sequence all stored track
numbers.