Philips AZ9040 - General Information

CASSETTE RECORDING
e To stop playback, press STOP*EJECT. RECORDING
= GENERAL INFORMATION
(CO
LEE]
få
|_|
Copyright:
Recording
is
permissible
insofar
as
copyright
or other rights of third parties are not infringed.
— The tape in the cassette is secured at both ends with
leader tape. At the beginning and end of the cassette,
nothing will be recorded for six to seven seconds.
e Always switch off the set after use with the POWER
button ©. Erasure prevention tabs
Winding the Cassette Tape
e Press >» to fast-forward the tape.
PAY + »
COLD
— For recording, use only ferro, IEC I/Type I Normal
Position Cassette on which the tabs have not been
ER SAITO Pus broken.
A
e Press << to fast-rewind the tape.
e Press STOP+EJECT to stop fast-forward or fast-rewind
before the end of the tape.
to» + > rand
CTT W
— The recording level is set automatically, regardless of
the position of VOLUME ©.
— Accidental erasure can be prevented by breaking the
small tab in the top left-hand comer of the back of the
cassetie. This protection can be reversed with a piece
of adhesive tape placed over the same comer.
Be sure not to cover
the tape-type
detection holes
— Store the cassettes at room temperature and do not put
them too close to magnets and transformers, for exam-
ple, TVs and loudspeaker boxes.
10