Philips CD181 - Restore Default Settings; Technical Data Battery; Register the Handsets

Register the handsets
You can register additional handsets
to the base station. The base station
can register up to 4 handsets.
1 Press MENU/OK on the
handset.
2 Select [SERVICES] >
[REGISTER], then press
MENU/OKtoconrm.
3 Press and hold on the base
station for 5 seconds.
4 Enter the system PIN (0000).
5 Press MENU/OKtoconrm
the PIN.
» Registration is completed in
less than 2 minutes.
Restore default
settings
You can reset your phone settings
to the original factory settings.
1 Press MENU/OK.
2 Select [SERVICES] >
[RESET], then press
MENU/OKtoconrm.
» The handset displays a
conrmationrequest.
3 Press MENU/OKtoconrm.
» All settings are reset
» The welcome screen displays.
Technical data
Battery
• GP: PH50AAAHC: 2 x AAA NiMH 1.2V
Rechargeable 500mAh batteries
• BYD: H-AAA500A-Z: 2 x AAA NiMH 1.2V
Rechargeable 500mAh batteries
Adapter
Base and charger:
• Philips:
SSW-1920EU-2/SSW-1920UK-2/
S003PV0600050/S003PB0600050:
Input: 100-240V 50/60Hz 0.2A;
Output: 6V 500mA
Note Hereby Philips Consumer Lifestyle,
declares that the CD181/CD186 is in
compliance with the essential requirements
and other relevant provisions of Directive
1999/5/EC.YoucanndtheDeclarationof
Conformity on www.p4c.philips.com.