Philips CDP 200 - Troubleshooting Guide; No Power or Playback Start; Lid and Playback Start Problems; Volume and DSC Issues

Troubleshooting
Troubleshooting
If
a
fault
occurs,
please
check
the
points
listed
below
before
taking
your
set
for
repair.
If
you
are
not
able
to
remedy
a
problem
by
following
these
hints,
consult
your
dealer
or
service
facility.
Under
no
circumstances
should
you
try
to
repair
the
set
yourself,
as
this
would
invalidate
your
guarantee.
Problem
ー Possible cause
e Remedy
No power or no CD play start
Display: no indication
Baiteries
— Batteries incorrectly inserted
e Insert the batteries correctly
— Use of new batteries
e Press PLAY/PAUSE Pil
— Batteries are empty
e Change/recharge the batteries
— Contact pins are dirty
e Clean them with a cloth
AC power adapter
— Loose connection
9 Connect the adapter securely
Lid of CD player does not open
—HOLD feature is activated
e Switch off the HOLD feature
Play does not start from the first track
—RESUME, SHUFFLE or PROGRAM is activated
e Switch off RESUME, SHUFFLE or PROGRAM
No volume and DSC
~ Volume and DSC work only at the REMOTES; jack
Connect headphones to the REMOTE Ω jack
22