17
Finalizing is a simple procedure that is necessary in order
to play back the discs on the CD Recorder/Player or on an
external CD player.
Note: Finalizing prevents any further recording on a CD-R.
A finalized CD-RW must be unfinalized to allow further
recording or erasure of tracks.
1 Make sure the disc (in the CD Recorder/Player) is
absolutely free of scratches and dust particles.
2 With the recorder stopped press FINALIZE and then within
3 seconds press RECORD.
‹ The approximate finalization time will appear in the
display.
RREECCOORRDD
&
FFIINNAALLIIZZEE
lights up. The display counts down
through the finalization.
On completion, the total number of tracks and the
total time recorded will appear on the display.
For CD-R CD RECORDABLE will change to CD on the
display.
For CD-RW no change will de seen on the display.
Finalizing will last at least 2 minutes.
Note: During finalisation, the CD Recorder/Player accepts no
operating commands.
For CD-RW discs only.
If you want to make more recordings (or to erase tracks) on
a finalized disc you must unfinalize it first. The Table of
Contents (TOC) on the disc will be removed.
To unfinalize:
1 Press ERASE twice.
‹ On the display, TOC and ERASE will flash.
2 Press RECORD within 3 seconds.
‹ TOC and ERASE light up continuously during erasure.
Note: This will take approximately 1 minute.
To Next Page
Loading...
